Belt Measurement Guide

Belts and dog collars are sized the same way: from the fold of the buckle to the middle hole. One measurement, taken from a belt or collar you already wear, is all you need. The printable guide at the bottom of this page shows the same steps with pictures.

How our sizes work

Everything we make is measured from the fold of the buckle to the middle hole. Order a 38 and it is 38" from the buckle fold to the middle hole. That leaves two holes on each side of it in case you gain or lose a little weight.

  • Middle hole = your size.
  • Two holes toward the buckle = tighter.
  • Two holes toward the tip = looser.

How to find your size

Grab a belt or collar that already fits and a tape measure:

  1. Start at the buckle end, right where the leather folds over for the buckle. Measure from the fold, not from the buckle itself.
  2. Measure from that fold all the way to the hole you wear it in.
  3. Do not measure to the end of the strap.
  4. That number is the size to order. We build it so that measurement lands on the middle hole.

The thickness rule (belts)

Most sizing mistakes happen right here. Our belts are much thicker than the belt you probably measured, and a thick belt needs more leather to wrap the same waist.

  • Measured a thin belt? Add 2" to what the tape says.
  • Going by pant size? Order 4" over it. A 34 pant wears a 38.
  • Between sizes? Round up.
  • Dog collars: order the number you measured. No adjustment needed.

Quick reference

What you know What to order
Measurement from buckle fold to hole on a thick belt That number
Measurement from buckle fold to hole on a thin belt That number + 2"
Pant size only Pant size + 4"
Dog collar measurement (buckle fold to hole) That number

Still not sure?

Text or call 317-517-3477 with your measurement and we'll tell you what to order. And if a new, unworn belt arrives and the size isn't right, we exchange it for a different size with no time limit — see our Satisfaction & Return Policy. Ready to order? Browse handmade leather belts or leather dog collars.

Printable sizing guide

Tyler Shupe Leather sizing guide for belts and dog collars: measure from the buckle fold to the middle hole; add 2 inches if you measured a thin belt, or order 4 inches over your pant size